Please note: Adobe Acrobat Reader must be installed before you can view any product information. Please click on the icon below to install Adobe Acrobat Reader.
  Install Acrobat Reader. Choose open from the "File Download" requester and follow onscreen instructions.

 Please select a product link below

514 Paper Faced Glassfibre Sound Deadening Roll	579 Acoustic Floor Slab	741 Lamella Floor Panel	744 Thermal Floor Panel
Designed for use as the resilient layer in Floor Type 2 constructions (concrete base with floating layer) by increasing its resistance to impact sound. Meets requirements of Approved Document E of The Building Regulations 2000	High compressive strength slab for the acoustic insulation of separating floors and thermal insulation of ground floors - rebated and square edge options	A laminate of 18mm t&g V313 chipboard and high density rockfibre lamella slab, offering impressive compression resistance. Provides a “floating floor principle” blend of impact / airborne sound insulation	A laminate of t&g (V313) chipboard and extruded polystyrene, providing a composite thermal insulation / flooring panel for laying on a concrete base

SD5 Sound Deadening Foam	924 Acoustic Floor Foam	SD10 Sound Deadening Foam	576 Paper Faced Rockfibre Slab
5mm Polyethylene Foam for use as a resilient layer to reduce impact sound under cement sand screeds in Type 2 floating floors	2mm thick closed cell 30 kgs/m3 density polyethylene foam for use as an acoustic underlay for laminate and veneer flooring systems. Enhances walking comfort and helps reduce footstep noise	10mm polyethylene foam for use as a resilient layer to reduce impact sound under cement sand screeds in type 2 floating floors	Paper faced rockfibre slab for use as the resilient layer in Floor Type 3.1A - meets Approved Document E 2003

556AF Access Floor Firestop Slab
Cavity fire stop provides up to 1 hours fire resistance in voids between raised access floors and main concrete floor slab