Please note: Adobe Acrobat Reader must be installed before you can view any product information. Please click on the icon below to install Adobe Acrobat Reader.
Install Acrobat Reader. Choose open from the "File Download" requester and follow onscreen instructions.

Please select a product link below

Acoustic Insulation Products - PDFs
514 Paper Faced Glassfibre Sound Deadening Roll 551 Cavity Fire Barrier 552 Cavity Stop Sock 557 Acoustic Cavity Closer
514 Paper Faced Glassfibre
Sound Deadening Roll

551 Cavity Fire Barrier

 552 Cavity Stop Sock 557 Acoustic Cavity Closer
Designed for use as the resilient layer in Floor Type 2 constructions (concrete
base with floating layer) by increasing its resistance to impact sound. Meets
requirements of Approved Document E
of The Building Regulations 2000
Designed to offer 60 minutes fire resistance between the outer brickwork and inner timber sheathing of timber frame constructions - can also be used for the control of sound flanking transmission at wall junctions
Designed to offer 60 minutes fire
resistance between the outer
brickwork and inner blockwork of
masonry wall constructions - can
also be used for the control of sound flanking transmission at wall
junctions
Used as an acoustic closer for party
walls. It helps minimise sound flanking
transmission at the junction of internal separating / external cavity walls and is protected by its integral dpc

561 Polythene Enclosed Acoustic Pad 562 BCO Foil Wrapped / Black Tissue Faced Acoustic Pad 571 Acoustic Roof Slab 572 Acoustic Roof Slab
561 Polythene Enclosed
Acoustic Pad		 562 BCO Foil Wrapped / Black
Tissue Faced Acoustic Pad		 571 Acoustic Roof Slab 572 Acoustic Roof Slab
Used as acoustic insulation in metal tray ceilings. Helps reduce “room to room” sound transmission over ceiling voids Polythene shows black through ceiling tile perforations.
This type is used where a specific fire rating is not required
For use as acoustic insulation in metal tray ceilings. Helps reduce “room to room” sound transmission over ceiling voids. Class 1 Surface Spread of Flame rated to BS 476: Part 7:1987 & Class O to The Building Regulations 1991
White Tissue Faced Acoustic Roof Slab for overlaying the inner sheet of double skinned roofing systems
WhiteTissue facing helps avoid slab
edges from showing as shadows
through the inner sheet perforations
Black Tissue Faced Acoustic Roof Slab cut to size for fitting within the profile of the inner sheet of double skinned roofing systems. Tissue shows black through inner sheet perforations for good visual effect

579 Acoustic Floor Slab 711 Lamella Wall Board 741 Lamella Floor Panel 924 Sound Deadening Foam
579 Thermal & Acoustic
Floor Slab		 712 Insulated Wall Board 741 Lamella Floor Panel SD5 Sound Deadening Foam
High compressive strength slab for the acoustic insulation of separating floors and thermal insulation of ground floors - rebated and square edge options

A laminate of plasterboard and crimped rockfibre slab with integral 15mm
acoustic fitting strip- offers an optimum blend of thermal, fire and acoustic performance
A laminate of 18mm t&g V313 chipboard and high density rockfibre lamella slab, offering impressive compression resistance. Provides a
“floating floor principle” blend
of impact / airborne sound insulation
5mm Polyethylene Foam for use as a resilient layer to reduce impact sound under cement sand screeds in Type 2 floating floors

924 Sound Deadening Foam    
SD10 Sound Deadening Foam 576 Paper Faced Rockfibre Slab  
10mm polyethylene foam for use as a resilient layer to reduce impact sound under cement sand screeds in type 2
floating floors

Paper faced rockfibre slab for use as the resilient layer in Floor Type 3.1A
- meets Approved Document E 2003

   © MAYPLAS - The Insulation Converter